Green Earth Floor can be installed on most existing floors, eg. wooden floors, PVC, concrete floors. Soft long-piled wall-to-wall carpets should be removed. Make sure that the surface is level, dry and even (< 4 mm per 2 m). The supporting floor needs to be thoroughly dried.

It is the purchaser’s/installer’s responsibility to carefully inspect all material for visual defects prior to installation. Boards that are considered imperfect or questionable in any way should be used in hidden areas, cut off or not installed. Green Earth Bamboo is manufactured in accordance with industry standards which permit a defect tolerance not to exceed 4%. 

Measure the room, so that the quantity of parquet required is known, If the last board required is too narrow in width, it may be necessary to install length-wise cut boards on both sides of the room to giv-e it an overall balanced look.

It is the purchaser’s/installer’s responsibility to carefully inspect all material for visual defects prior to installation. Boards that are considered imperfect or questionable in any way should be used in hidden areas, cut off or not installed. Green Earth Bamboo is manufactured in accordance with industry standards which permit a defect tolerance not to exceed 4%. 

Before starting installation, it is important you read all instructions and warranty information. By starting installation of this product you are agreeing that you have read and understand all installer/owner’s requirements and responsibilities and are aware that deviating from the instructions and recommendations in this installation guide may result in voiding the product warranty.